- Products
-
- Oil & Coolers
-
- MED HIGH PERFORMANCE OIL HEAD GASKET
MED HIGH PERFORMANCE OIL HEAD GASKET
Description
Our high performance oil filter head gasket is cut from a special aramid fibre material with nitrile rubber binder.
These are thicker than standard types and make an excellent upgrade.
General material properties:
- Good resistance to oils, fuels and hydrocarbons
- High creep resistance
- Low leakage
- Anti-stick finish
- Asbestos free
Frequently Asked Questions
Does this only fit the MED oil filter head, or will it fit original A-Series engines too?
This is ideal for any A-Series engine. It fits between the oil filter housing and the block, on the distributor side of the engine.
Is this just a standard gasket?
No, it is our own MED oil filter head gasket, cut from a special aramid fibre material with nitrile rubber binder. These are thicker than standard types and make an excellent upgrade. The colour can vary depending on material availability.
Do I need to use any sealer on this gasket?
We would use a light application of grease on the gasket before tightening.
What torque setting should I use on the oil filter housing?
Be really careful with this, as it's possible to split the gasket if you go too heavy. We would suggest 14lb.ft, or nip-up by feel.
Related Products
MED HIGH PERFORMANCE THERMOSTAT GASKET
MED HIGH PERFORMANCE WATER PUMP GASKET
MED RACE FILTER HEAD KIT
MED BREATHER KIT - ALUMINIUM OR STEEL
MED BILLET OIL FILTER HEAD
MED BILLET FILTER HEAD KIT
BUDGET 13-ROW OIL COOLER KIT
MED RACE OIL COOLER KIT
MIDGET/SPRITE OIL FILTER HEAD SPACER
OIL FILTER
SETRAB RACE OIL COOLER
