- Products
-
- MED S/C DROP GEARS - INDIVIDUAL
MED S/C DROP GEARS - INDIVIDUAL
Description
If you already have one of our high performance straight-cut drop gear sets and require a change of ratio, a change of engine type or just some spares, we can supply any gear from the kits separately.
We can supply;
- 1275 primary gear - 23 or 24 teeth
- 998 primary gear - 23 or 24 teeth
- Standard pin type idler gear - early or late type
- Roller bearing idler gear - early or late type
- Input gear - 23 or 24 teeth
Please note that spares are only compatible with the straight-cut MED gear sets.
All are interchangeable within the sets, so you can upgrade to a roller bearing idler from a standard pin type, or change idler and primary gear ratios.
Additional Information
The MED drop gear sets are available in three different ratios, which can be used to tweak the final drive ratio. Changing the effective final drive ratio will either improve acceleration or top speed potential, although one will always come at the expense of the other.
We can do this by changing the tooth count on either the idler gear or primary gear to 23 or 24 teeth. The idler gear in the middle remains at 30 teeth regardless.
The table below shows the various tooth counts and the effect on the drop gear ratio:
| Drop gear set configuration | |||
| 1:1 | 1:1.043 | 1:0.958 | |
| Input gear | 24 teeth | 24 teeth | 23 teeth |
| Idler gear | 30 teeth | 30 teeth | 30 teeth |
| Primary gear | 24 teeth | 23 teeth | 24 teeth |
To calculate your effective final drive ratio based on the above, simply multiply your existing final drive ratio by the number of the drop gear set. So for example, a 3.47:1 final drive ratio with a 1:1.043 drop gear set then becomes 3.62:1. Remember that the higher the number, the shorter the gearing will be, so this change will result in a higher engine RPM for a given speed.
Changing the primary gear is easier than removing the differential to change the final drive ratio, so racers use this to adjust their gearing to suit different circuits. Keeping an engine in its peak powerband for longer will result in a faster lap time.
See the following table for our final drive conversions using the various drop gear sets:
| Drop gear ratio adjustment | ||
| Original final drive |
With 1:1.043 drop gears |
With 1:0.958 drop gears |
| 3.47:1 | 3.62:1 | 3.32:1 |
| 3.75:1 | 3.91:1 | 3.59:1 |
| 3.875:1 | 4.04:1 | 3.71:1 |
| 4.066:1 | 4.24:1 | 3.90:1 |
| 4.2:1 | 4.38:1 | 4.02:1 |
| 4.5:1 | 4.69:1 | 4.31:1 |
Related Products
MED S/C DROP GEAR SET - STANDARD PIN
MED S/C DROP GEAR SET - ROLLER TYPE
CLUTCH OIL SEAL DUST SHIELD
MED GEARBOX REBUILD KIT
MED VERNIER CAMBELT DRIVE
MED PRIMARY GEAR BACKING RING & C-CLIP
PRIMARY GEAR/CLUTCH OIL SEAL
IDLER GEAR BEARING
MED CLUBMAN GEAR KIT
MED COMPETITION LAYSHAFT
