MED 45 DCOE - DCR INTAKE SYSTEM

The DCR system has been dyno tested on numerous race engines with the Weber 45DCOE carburettor and produced a gain of between 4 to 6bhp over the standard-fitment ram pipes when correctly set up.

The central velocity stack creates more airflow into the auxiliary venturi, which will increase the air speed over the venturi and in turn amplify the mixture signal, bringing the engine on to cam earlier.

On the outer stub stack, an optimised elliptical form smoothes the airflow into the choke area, creating more power throughout the range. This is aided by the full-flow open-backed ITG foam filter.

Please note - may require light modification for master cylinder clearance on some left-hand-drive Minis.

Kit contents:

• 2x central velocity stacks.

• 4x velocity stack spacers.

• 2x carburettor inserts. 

• Aluminium filter base plate.

• ITG foam air filter.

• All fixings required.

The filter measures 149mm tall, 298mm wide and 90mm deep.

Reticulated polyester foam filters achieve maximum air flow, cleaning efficiency and dust load-up tolerance.They allow air to pass through without causing a large drop in pressure, arresting a high proportion of airborne dust while feeding the engine clean air.

Dust load-up tolerance is the capability to absorb a large amount of dust without reducing air flow capacity.