- Products
-
- VERTO F/W BOLT AND WASHER
VERTO F/W BOLT AND WASHER
Description
Standard-spec replacement flywheel bolt and key washer for the later type Verto flywheel.
These are suited to all Minis using a Verto clutch setup, including SPi and MPi.
Fitting instructions
1. Install bolt and keyway washer to the crankshaft.
2. Lock engine using your preferred method.
3. Torque bolt to 120lb/ft, to seat flywheel on the crankshaft taper.
4. Undo the bolt.
5. Apply 27-01 thread lock and torque to 120lb/ft.
Frequently Asked Questions
What thread size is this bolt?
It's the standard crankshaft thread, 5/8" x 16 tpi Whitworth.
Will this suit all Mini crankshafts?
Yes, but before installing the flywheel, check that the bolt does not bottom-out on the thread, or more importantly that there is no swarf or damage inside that may otherwise affect fitment. If the bolt feels too tight on the thread, inspect the crankshaft thread before continuing.
Will this suit all classic Mini flywheels?
No, only the Verto style flywheel design, introduced in the early 1980s, which has a separate centre boss that attaches to the clutch cover. We also keep a bolt and washer to suit the early 'pre-Verto' flywheel.
What size socket do I need for the flywheel bolt?
These are 1 1/2" AF.
What is the torque setting?
Please see the instructions above.
Related Products
MED COMPETITION VERTO CLUTCH COVER
MED DAMPER PULLEY BOLT
MED MPI INJECTION ULTRA LIGHT ST2
MED PRE-VERTO F/W BOLT AND WASHER
MED VERTO CLUTCH CENTRE
MED VERTO ULTRA LIGHT FLYWHEEL
VERTO BRAIDED CLUTCH HOSE
VERTO CLUTCH RELEASE BEARING
VERTO CLUTCH COVER - STANDARD
